Contact Us


Contact Us

Please fill in the following form with as much information as possible so that we can give a correct answer to your request.

By submitting, I declare that I accept the Terms and Conditions e Privacy and Cookies Policy

Electronic 2K mixing system for AirCoat and Airless applications. Different variants can be configured for different applications. Second color can be retrofitted with extension set.

Thanks to completely non-contacting discharge measurement with the patented magnetic stroke sensor, the extremely accurate dosage provides for optimal mix accuracy and consistent surface quality, even with high-viscosity material or a high delivery rate.

Easy handling
The entire operating concept is based on three push-buttons: Start - Stop - Rinse. All further parameters are easily adjusted with password protection to the application and the applied material. Most importantly: The fully automatic rinsing process reliably and completely cleanses the system of mixed material.

Flexible applications
The comprehensive program of the IceBreaker® piston pumps provide the optimal selection with regard to pressure and delivery rate for every purpose.

Individual set-up
Depending on the application or assembly situation, the TwinControl is available on a frame with stabile swivel casters, on a heavy transport trolley, or with a wall mount.

With the twincontrol you can have greater control over the work produced with it's memory system, in this way you can monitor the consumption of each component individually. The components mixing ratio can also be adjusted in seconds.

Technical Data:

Input voltage (not Atex): 115 – 230 V

Input frequency (not Atex) 50 – 60 Hz

Air inlet pressure: 5,0 – 8,0 bar, 73 – 116 PSI

Air inlet connection I–G 1/2"

Mixing ratio: 0,1:1 – 20:1

Mixing accuracy: ± 2%

Material pressure: 250 bar, 3626 PSI

Volume flow at a 1:1 mixing ratio (max.): 4.2 l/min

Volume flow at a 4:1 mixing ratio (max.): 2.6 l/min

Volume flow at a 10:1 mixing ratio (max.) 2.4 l/min

Volume flow at a 20:1 mixing ratio (max.) 2.2 l/min

Material inlet: A–M 36x2

Material outlet A–G 3/8''

Max. material pressure at pump inlet: 5 bar, 73 PSI

Material temperature: 5 - 60 °C, 41.0 - 140.0 °F

Ambient temperature: 5 – 40 °C, 41 – 104 °F

Material pH: 3,5 – 9,0 pH